Dietary Modelling to Explore the Impact of Potassium Chloride Replacement for Sodium in Bread for Adults with Chronic Kidney Disease.

Food manufacturers are increasingly substituting potassium chloride (KCl) in food products so as to reduce the sodium chloride content. Bread and bread products are common staple foods in many Western households and are a target for recipe reformulation using KCl. Given that chronic kidney disease (CKD) is a medical condition of global importance that requires dietary potassium restriction in the later stages, we sought to evaluate the impact and safety of varying levels of KCl substitution in bread products. We undertook a secondary analysis of dietary data from the National Nutrition and Physical Activity Survey 2011-2012 for 12,152 participants (154 participants with CKD). The sodium chloride content in bread and bread-based products was substituted with 20%, 30%, and 40% of KCl. The contribution of these alterations in the dietary potassium intake to the total daily potassium intake were then examined. The replacement of sodium in bread with varying amounts of KCl (20%, 30%, and 40%) resulted in one third of people with CKD exceeding the safe limits for dietary potassium consumption (31.8%, 32.6%, and 33%, respectively). KCl substitution in staple foods such as bread and bread products have serious and potentially fatal consequences for people who need to restrict dietary potassium. Improved food labelling is required for consumers to avoid excessive consumption.

Characterization of 3-isopropylmalate dehydrogenase from extremely halophilic archaeon Haloarcula japonica.

3-Isopropylmalate dehydrogenase (IPMDH) catalyzes oxidative decarboxylation of (2R, 3S)-3-isopropylmalate to 2-oxoisocaproate in leucine biosynthesis. In this study, recombinant IPMDH (HjIPMDH) from an extremely halophilic archaeon, Haloarcula japonica TR-1, was characterized. Activity of HjIPMDH increased as KCl concentration increased, and the maximum activity was observed at 3.0 m KCl. Analytical ultracentrifugation revealed that HjIPMDH formed a homotetramer at high KCl concentrations, and it dissociated to a monomer at low KCl concentrations. Additionally, HjIPMDH was thermally stabilized by higher KCl concentrations. This is the first report on haloarchaeal IPMDH.

Study of the Dielectric Properties of Artificial Sweat Mixtures at Microwave Frequencies.

Analysis of sweat is of interest for a variety of diagnosis and monitoring applications in healthcare. In this work, detailed measurements of the dielectric properties of solutions representing the major components of sweat are presented. The measurements include aqueous solutions of sodium chloride (NaCl), potassium chloride (KCl), urea, and lactic acid, as well as their mixtures. Moreover, mixtures of NaCl, KCl, urea, and lactic acid, mimicking artificial sweat at different hydration states, are characterized, and the data are fitted to a Cole-Cole model. The complex dielectric permittivity for all prepared solutions and mixtures is studied in the range of 1-20 GHz, at temperature of 23 °C, with ionic concentrations in the range of 0.01-1.7 mol/L.

Dynamic aspects of salt reduction in tomato sauce by use of flavor enhancers and a bitter blocker.

Several government agencies have established guidelines for the food industry to reduce sugar, fat, and salt in processed foods. The objective of this study was to determine the dynamic sensory profile of tomato sauce formulated with flavor enhancers, a bitter blocker and 50% sodium content reduction. The perception of consumers and a trained panel was explored. Consumers performed temporal dominance of sensations (TDS) and temporal acceptance (TA) while the trained panel performed time-intensity analysis (TI). TA indicated that flavor enhancers improve initial acceptance of a sample but that its masking effect weakens 30 s after ingestion. TI showed that despite promoting salty equivalence, substitute salts were not able to completely suppress the bitter taste characteristic of potassium chloride and the addition of lysine as a bitter blocker was the least effective strategy. In TDS the bitter taste was not dominant in any of the samples. However, the presence of unusual flavors/tastes to the consumers like metallic and umami seems to have interfered negatively in the evaluation of the flavors. Flavor enhancers have been widely used to reformulate processed foods in order to reduce sodium content, preserving sensory acceptance. This study provides information on the dynamic behavior of different salt substitutes.

A potassium chloride to glycine betaine osmoprotectant switch in the extreme halophile Halorhodospira halophila.

Halophiles utilize two distinct osmoprotection strategies. The accumulation of organic compatible solutes such as glycine betaine does not perturb the functioning of cytoplasmic components, but represents a large investment of energy and carbon. KCl is an energetically attractive alternative osmoprotectant, but requires genome-wide modifications to establish a highly acidic proteome. Most extreme halophiles are optimized for the use of one of these two strategies. Here we examine the extremely halophilic Proteobacterium Halorhodospira halophila and report that medium K+ concentration dramatically alters its osmoprotectant use. When grown in hypersaline media containing substantial K+ concentrations, H. halophila accumulates molar concentrations of KCl. However, at limiting K+ concentrations the organism switches to glycine betaine as its major osmoprotectant. In contrast, the closely related organism Halorhodospira halochloris is limited to using compatible solutes. H. halophila performs both de novo synthesis and uptake of glycine betaine, matching the biosynthesis and transport systems encoded in its genome. The medium K+ concentration (~10 mM) at which the KCl to glycine betaine osmoprotectant switch in H. halophila occurs is near the K+ content of the lake from which it was isolated, supporting an ecological relevance of this osmoprotectant strategy.

Investigation on the Intrinsic Potential of Using Potassium Chloride for Partially Replacing NaCl in Kimchi and the Effect of Information on Consumer Acceptance of Sodium-Reduced Kimchi According to Age.

The high sodium content of kimchi is a contradicting factor from its fame as a healthy food. With the aim of reducing the sodium content of kimchi, the objective of this study was to understand the effect of providing "sodium-reduced" information on the acceptance of kimchi according to the age of consumption. Six sodium-reduced kimchi samples, prepared with different percentages of sodium reduction (25% and 50%) and potassium chloride concentration (none, 0.47%, and 0.93%), were compared to control kimchi (2.0% w/v NaCl). Sensory characterization of the samples was obtained using descriptive analysis. A total of 167 kimchi consumers with balanced proportion of the young (below 40) and the old (above 40) evaluated seven kimchi samples in either of the two conditions: blind testing condition or informed testing condition where each of the samples was provided with a label that informed about "sodium reduction percentage" and "whether a salt replacer was used or not." The results showed that in terms of healthiness perception, Korean female consumers believed that kimchi with a high sodium reduction rate would contribute to health in general, though an unfavorable notion of using a salt replacer was also observed. Also, the results suggested that promoting information about sodium reduction in kimchi would generally increase consumer acceptance. However, this phenomenon was influenced not only by the sample for which the information was provided, but also by the age of consumers with different health interests and kimchi experience. PRACTICAL APPLICATION: The findings of this study showed simply reducing sodium and promoting it with a health claim showed limitation in achieving a high level of sodium reduction, such as a 50% reduction rate, which implied the importance of using supplementary material such as potassium chloride that can fulfill the missing saltiness and flavors of the original product. Promotion of "sodium-reduced" claims in kimchi generally results in increased consumer acceptance. However, the effectiveness of the information was dependent on which sample was provided and the age of the consumers, among whom health interests and kimchi experience differ.

Effect of sodium chloride reduction or partial substitution with potassium chloride on the microbiological, biochemical and sensory characteristics of semi-hard and soft cheeses.

Sodium reduction in the human diet is currently one of the main concerns for public health agencies and, consequently, has become a challenge for the food industries. In this study, the impact of reduced sodium chloride content (20%) or its partial substitution with potassium chloride in soft ("Camembert"-type) and semi-hard ("Reblochon"-type) cheeses was evaluated. Analyses included physicochemical and biochemical composition, microbial counts, 16S rRNA gene metabarcoding and metatranscriptomic analysis, volatile aroma compounds and sensory analysis. Regarding soft cheeses, the salt content of cheeses affected proteolysis at 21 days of ripening. RNA sequencing revealed that the relative activity of G. candidum increased, whereas that of P. camemberti decreased in reduced salt cheeses in comparison to the controls. Higher global intensity of odor and taste was observed in cheeses with reduced salt content, consistent with higher levels of alcohol and ester components. Regarding semi-hard cheeses, modifications of salt content did not significantly affect either their biochemical parameters and sensory characteristics or their technological microbial composition at day 21 of ripening. Finally, no impact of salt content was observed on the growth of the spoiler Yarrowia lipolytica in soft cheeses. In contrast, reducing salt content increased spoiler growth in semi-hard cheeses, as highlighted by a greater development of Pseudomonas that led to an increase in cheese proteolysis and lipolysis. In conclusion, the effect of reducing salt content is highly dependent on the cheese type. This factor should thus be taken into account by the dairy industry when the reduction of salt content is being considered. Moreover, the quality of raw products, in particular, the level of spoiler microorganisms, must be controlled before use during dairy processes.

Ultraviolet Absorption Cross Sections of KOH and KCl for Nonintrusive Species-Specific Quantitative Detection in Hot Flue Gases.

An understanding of potassium chemistry in energy conversion processes supports the development of complex biomass utilization with high efficiency and low pollutant emissions. Potassium exists mainly as potassium hydroxide (KOH), potassium chloride (KCl), and atomic potassium (K) in combustion and related thermochemical processes. We report, for the first time, the measurement of the ultraviolet (UV) absorption cross sections of KOH and KCl at temperatures between 1300 K and 1800 K, using a newly developed method. Using the spectrally resolved UV absorption cross sections, the concentrations of KOH and KCl were measured simultaneously. In addition, we measured the concentrations of atomic K using tunable diode laser absorption spectroscopy, both at 404.4 and 769.9 nm. The 404.4 nm line was utilized to expand the measurement dynamic range to higher concentrations. A constant amount of KCl was seeded into premixed CH4/air flames with equivalence ratios varied from 0.67 to 1.32, and the concentrations of KOH, KCl, and atomic K in the hot flue gas were measured nonintrusively. The results indicate that these techniques can provide comprehensive data for quantitative understanding of the potassium chemistry in biomass combustion/gasification.

The effect of inorganic salt in wastewater on the viscosity of coal water slurry.

The preparation of coal water slurry (CWS) using wastewater, which contains inorganic and organic components, is one method of wastewater utilization. In this study, the effect of inorganic salts on the viscosity of CWS was examined. The results show that monovalent salts (NaCl, KCl) decreased the viscosity of CWS. The viscosity of CWS was not affected by bivalent salts (CaCl2, MgCl2). However, CWS combined with trivalent salt (AlCl3) sharply increased the viscosity. The zeta potential of CWS with inorganic salts increased which can enhance the electric repulsion and beneficial to reduce the viscosity. The content of free water in CWS with trivalent salt decreased, and the freedom of the free water in CWS with trivalent salt decreased which were all bad to the viscosity and the adsorption of the dispersant on the particles. Compared with the surface polarity of the particles without inorganic salts, the surface polarity of the particles with divalent salts was similar to those without inorganic salts. Under the comprehensive influence, divalent salt has little effect on the viscosity of CWS.

Reducing 50% sodium chloride in healthier jerked beef: An efficient design to ensure suitable stability, technological and sensory properties.

The objective of this study was to evaluate the effects of the partial replacement of NaCl by blends of KCl and CaCl2 on the physicochemical, microbiological, and sensory properties of jerked beef. For that, in the dry and wet salting stages, 50% NaCl of the control treatment (FC1) was replaced by 50% KCl (F1), 50% CaCl2 (F2), and a blend containing 25% KCl and 25% CaCl2 (F3) at equivalent concentrations based on the ionic strength. All reformulated treatments presented a significant sodium reduction when compared to the control (27.57% F1, 41.59% F2, and 36.74% F3). The CaCl2 blends resulted in final products with bitter taste and rancid aroma accompanied by a higher TBARS and shear force and lower a* values (P < .05). The substitute salts did not affect the microbiological stability (P > .05). The present results demonstrate that adding 50% KCl may be a good strategy to reduce sodium in jerked beef.

Streptomyces albulus yields ε-poly-L-lysine and other products from salt-contaminated glycerol waste.

Actinomycetes are the most important microorganisms for the industrial production of secondary metabolites with antimicrobial and anticancer properties. However, they have not been implicated in biorefineries. Here, we study the ability of the ε-poly-L-lysine producing Streptomyces albulus BCRC 11814 to utilize biodiesel-derived crude glycerol. S. albulus was cultured in a mineral medium supplemented with up to 10% w/v sodium chloride or potassium chloride, and with crude glycerol as the sole carbohydrate source. Under these conditions, the strain produced 0.1 g ε-poly-L-lysine per 1 g of biomass. RNA sequencing revealed upregulation of the ectoine biosynthetic pathway of S. albulus, which provides proof of halotolerance. S. albulus has several silent secondary metabolite biosynthetic clusters predicted within the genome. Based on the results, we conclude that S. albulus BCRC 11814 is a halotolerant microorganism capable of utilizing biodiesel-derived crude glycerol better than other actinomycetes included in the present study. S. albulus has the potential to be established as microbial platform production host for a range of high-value biological products.

Development of a novel smoke-flavoured salmon product by sodium replacement using water vapour permeable bags.

BACKGROUND: Food manufacturers need to reduce sodium content to meet consumer and public health demands. In the present study, the use of sodium-free (SF) salt and KCl to develop a novel smoke-flavoured salmon product with reduced sodium content was evaluated. Fifty percent of NaCl was replaced with 50% of SF salt or 50% KCl in the salmon smoke-flavouring process, which was carried out using water vapour permeable bags. RESULTS: Triangle tests showed that samples with either SF salt or KCl were statistically similar to the control samples (100% NaCl). Because no sensorial advantage in using SF salt was found compared to KCl and given the lower price of KCl, the KCl-NaCl samples were selected for the next phase. The changes of physicochemical and microbial parameters in smoke-flavoured salmon during 42 days showed that partial replacement of NaCl with KCl did not significantly affect the quality and shelf-life of smoke-flavoured salmon, which was over 42 days. CONCLUSION: Smoke-flavoured salmon with 37% sodium reduction was developed without affecting the sensory features and shelf-life. This is an interesting option for reducing the sodium content in such products to help meet the needs set by both health authorities and consumers. © 2017 Society of Chemical Industry.

Fluorescence spectroscopy coupled with independent components analysis to monitor molecular changes during heating and cooling of Cantal-type cheeses with different NaCl and KCl contents.

BACKGROUND: Reduction of NaCl content of cheeses has received considerable attention by research during the past decades because of its health effects. Nonetheless, NaCl reduction is a challenge since it plays an important role in cheese quality, such as structure, texture and functional properties. Several methods were used to evaluate the effect of NaCl on these attributes. In this study, Cantal-type cheeses with different salts (NaCl and KCl) were analyzed for their structure at a molecular level and rheological properties during heating (20-60 °C) and cooling (60-20 °C). The structure was investigated by synchronous fluorescence spectroscopy (SFS) and the rheological properties by small-amplitude oscillatory test. RESULTS: Independent components analysis (ICA) gave three independent components that were attributed to coenzyme/Maillard reaction products (IC1), tryptophan (IC2) and vitamin A (IC3). Signal proportions of each IC depicted information regarding the changes in those fluorophores with salts, heating and cooling. In addition, canonical correlation analysis (CCA) of the IC proportions and rheological measurements related modifications at a molecular level evaluated by fluorescence to cheese texture (0.34 < R2 < 0.99). CONCLUSION: This study demonstrated that SFS can monitor and characterize modification of Cantal-type cheeses at a molecular level, based on the analysis of the fluorescence spectra by ICA. The nature of correlation between signal proportions and the rheological parameters depicted that rheological attributes of cheeses observed at the macroscopic level can be derived from fluorescence spectra. © 2017 Society of Chemical Industry.

Free-sodium salts mixture and AlgySalt® use as NaCl substitutes in fresh and cooked meat products intended for the hypertensive population.

This work aims at reducing the use of added NaCl in processed meat products because of its negative effects on hypertensive population by replacing it by sodium-free salts mixture (SM: KCl, MgCl2 and CaCl2) in fresh and cooked sausages. The technological, sensory, and microbiological effects of SM were compared with a commercial replacer based on seaweed extracts (AlgySalt®). A total substitution of NaCl with the latter and a partial one with SM (80% and 50%) were studied in cooked sausages and a total NaCl substitution with both substitutes was performed in fresh sausages. As a result, hardness increased in AlgySalt® reformulated samples, while it decreased when 80% SM were used. Whereas, AlgySalt® induced less cooking loses than SM. To some extent, microbiological counts showed a similarity between reformulated and control samples for both sausage types, whereas reformulated products containing SM revealed better sensory properties for both meat products. Therefore, using SM as NaCl replacer is adequate for processed meat products.

Increasing Oil Concentration Affects Consumer Perception and Physical Properties of Mayonnaise-type Spreads Containing KCl.

Reducing sodium intakes remains a global challenge for the food industry. KCl is a potential salt substitute but imparts bitterness when used at high concentrations. Little is known about how oil concentrations (OC) affect consumers' perception of saltiness and bitterness in emulsion products such as mayonnaise containing KCl. We evaluated consumers' perception and physical properties of mayonnaise-type spreads at various oil and tastant (NaCl or KCl) concentrations. Consumers (N = 306) evaluated saltiness, bitterness, overall taste liking (OTL) and purchase intent (PI). Viscosity, pH, water activity, and consistency/texture were also measured. Oil and tastant (NaCl or KCl) concentrations had significant effects on saltiness, viscosity, and pH. As OC increased, saltiness intensity slightly decreased for spreads. Increasing oil concentration increased viscosity. Generally, spreads containing KCl had higher bitterness and pH than spreads containing NaCl. All spreads containing KCl were penalized for being "too bitter." PI was affected by OTL for all spreads but OC was also a significant factor in the purchase decision of spreads containing NaCl. This study demonstrated that increasing OC affected consumers' taste perception (saltiness and bitterness) and spreads' physical properties including pH and viscosity.

Impact of NaCl reduction on lactic acid bacteria during fermentation of Nocellara del Belice table olives.

Table olives are widely consumed worldwide but, due to the presence of NaCl in fermenting brines, they contain high levels of sodium. A promising strategy to lower sodium content is the reduction or substitution of NaCl in brines with other chlorides. However, these procedures may impact safety, spoilage, as well as quality and technological properties, including the evolution and final composition of the fermenting microbiota. In the present work the effects of partially replacing NaCl with KCl in fermenting brines on the microbiological quality of Nocellara del Belice olives produced by Spanish style (Sivigliano) or Castelvetrano methods have been analyzed. In both cases, the fermentation steps were performed in parallel, in brines containing either NaCl alone, or partially replaced with different proportions of KCl (25, 50 and 75%), while maintaining a final saline concentration of 9% (Sivigliano method) or 7% (Castelvetrano). To compare microbial dynamics in the experimental brines, changes in bacterial ecology were monitored during fermentation with a polyphasic approach, including both microbiological methods and culture-independent techniques based on DGGE and NGS analysis. The main microbial groups detected in the olive microbiota from both production procedures were LAB and yeasts. Overall, the data demonstrate that partial replacement of NaCl with KCl does not increase the risk of contamination, nor the overgrowth of pathogens or spoiler microbes.

Impact of lysine and liquid smoke as flavor enhancers on the quality of low-fat Bologna-type sausages with 50% replacement of NaCl by KCl.

Low-fat Bologna-type sausages were produced with 50% of NaCl replaced by KCl and with addition of lysine and/or liquid smoke as flavor enhancers. The influence of sodium reduction on technological, physicochemical, and microbiological properties was determined. In addition, the sensory properties were evaluated using a Check all that apply questionnaire (CATA) and a consumer study. The partial replacement of NaCl by KCl did not have negative impacts on physicochemical, technological, and microbiological properties. However, the addition of KCl affected the sensory acceptance, as consumers identified by CATA questionnaire a reduction in salty taste and an increase in bitter, astringent, and metallic taste. The isolated or combined addition of lysine and liquid smoke reduced the sensory quality defects caused by the addition of KCl. Therefore, high quality low-fat Bologna-type sausages with sodium reduction close to 50% can be produced by replacing 50% NaCl by KCl and with addition of 1% lysine and/or 0.1% liquid smoke.

Fermentation in nutrient salt mixtures affects green Spanish-style Manzanilla table olive characteristics.

This work studies the effects of the substitution of NaCl with KCl and CaCl2 on the physicochemical, mineral and sensory profile of fermented green Spanish-style Manzanilla olives, using an enlarged centroid mixture design. An increasing presence of CaCl2 in the initial brines improved the colour index, L(∗), b(∗) values, and firmness. The Na in the olives decreased (linearly) while the levels of K and Ca increased (quadratic) as a function of the KCl and CaCl2 concentrations in the initial brines. CaCl2 also improved the retention of Zn and P in the flesh. PLS showed a strong relationship between Ca and bitterness, hardness, fibrousness, crunchiness and saltiness (negative) and allowed for the prediction of sensory attributes (except acid) from the mineral contents in the flesh. Most of the treatments could lead to new green Spanish-style Manzanilla olive presentations with reduced Na and healthier characteristics.

New recommendations for measuring collagen solubility.

The heat-solubility of intramuscular collagen is usually conducted in 1/4 Ringer's solution at pH7.4, despite this ionic strength and pH being inappropriate for post-rigor meat. The current work studied the percentage of soluble collagen and hydrothermal isometric tension characteristics of perimysial strips on bovine semitendinosus muscles in either 1/4 Ringer's solution, distilled water, PBS, or a solution of the same salt concentration as 1/4 Ringer's but at pH5.6. Values of % soluble collagen were lower at pH7.4 than 5.6. Increasing ionic strength reduced % soluble collagen. The maximum perimysial isometric tension was independent of the bathing medium, but the percent relaxation was higher at pH7.4 than at pH5.6, and increased with ionic strength of the media. It is recommended that future measurements of collagen solubility and tests on connective tissue components of post-rigor meat should be carried out in a solution of concentrations NaCl and KCl equivalent to those in 1/4 Ringer's, but at pH5.6, a pH relevant to post-rigor meat.

Technological, sensory and microbiological impacts of sodium reduction in frankfurters.

Initially, meat emulsions were studied in a model system to optimize phosphate and potassium chloride concentrations. In the second step, frankfurters containing 1.00%, 1.30% and 1.75% sodium chloride (NaCl) were processed and their stability was monitored over 56 days. In the emulsion tests, the best levels in relation to shear force found in model system were 0.85% and 0.25% of potassium chloride and phosphate, respectively. In the second step, treatments with 1.30% and 1.75% NaCl performed better in most of the analysis, particularly the sensory analysis. Consumers could identify the levels of salt, but this was not the factor that determined the overall acceptability. In some technological parameters, frankfurters with 1.30% NaCl were better than those with 1.75%. This represents a reduction of approximately 25% sodium chloride, or 18% reduction in sodium (916 mg/100g to 750 mg/100g), and it appears to be feasible from a technological, microbiological and sensory point of view.